Say goodbye to mediocrity, refuse to be fixed, the public attention

LEIMENG TECHNOLOGY

01-27

How does KTV choose professional audio equipment?

Few things in the world are more subjective than evaluating a speaker based on hearing alone. One audiophile's meal can be another audiophile's poison. But for experienced listeners—that is, those who have spent hundreds of hours comparing several speakers under controlled conditions and who agree that there should be a set of guidelines—their methods and conclusions should be There are some common basic points.

01-27

Explanation of related technical terms of audio accessories wireless microphone

When the receiver of the wireless microphone of the audio accessories does not receive the signal, or the signal is weak, in order to avoid the output noise, it will automatically cut off the output signal, this function is called squelch. If there is no squelch function, or if the squelch function is poor, noise will be emitted from the speaker speakers. Noise will affect the Audio quality, destroy the atmosphere of the scene, and even damage the amplifier equipment.

01-27

Meetings need such an audio accessory microphone!

The microphone industry has undergone continuous innovation. Traditional microphones need to be held in the hand all the time. It is relatively heavy and laborious. It has been improved into today's audio accessories gooseneck microphone. It can be fixed on the desktop and does not need to be held in the hand all the time, which is greatly convenient to use. Loved by all kinds of meeting rooms. The gooseneck microphone of bomo's audio accessories is perfected on this basis.

01-27

How to diagnose and deal with dynamic microphones

The main fault of the moving coil microphone is disconnection, one is the disconnection at the plug of the microphone, the other is the disconnection of the microphone lead itself, and the third is the disconnection at the voice coil. The disconnection fault can be found through the ohm gear of the multimeter. The solution to the broken wire fault is to re-solder the broken wire. When the broken wire is broken at the connection of the voice coil, it is difficult to weld, and sometimes even impossible to repair.

< 12 > proceed page